Powerhouse Museum Collection Search 2.5
Category history:
   
Industrial Machinery and Equipment > Horizontal engines

+ B876 Model steam engine, horizontal, A A...
+ B888 Model of twin cylinder horizontal s...
+ B889 Model undertype steam engine, with ...
+ B922 Model steam engine, single cylinder...
+ B926 Model steam engine, single cylinder...
+ B935 Model, single cylinder horizontal s...
+ B936 Model factory steam engine, single ...
+ B938 Model steam engine, twin cylinder, ...
+ B952 Model steam engine, single cylinder...
+ B1098 Engine model, steam, horizontal, b...
+ B1101 Hot air engine, metal / paint, des...
+ B1105 Engine model, single cylinder hori...
+ B1116 Model, single cylinder horizontal ...
+ B1122 Engine model, steam, single cylind...
+ B1123 Engine model, miniature, steam, si...
+ B1151 Model, twin cylinder horizontal st...
+ B1153 Engine model, horizontal, steam, s...
+ B1159 Engine model, horizontal, & dynamo...
+ B1160 Model, twin cylinder horizontal st...
+ B1190 (1) 1 only working model of horizo...
+ B1211 Model, single cylinder horizontal ...
+ B1212 Engine model, horizontal, steam, s...
+ B1328 Steam engine model, horizontal, si...
+ B1334 W.M. single cylinder horizontal st...
+ B1441 Stationary steam engine and boiler...
+ B1460 Aircraft engine, Armstrong Siddele...
+ B1525 Engine model, horizontal, & compre...
+ B1529 Engine model, horizontal, steam, s...
+ B1533 Engine model, winch; miniature mod...
+ B1541 Model engine [horizontal single cy...
+ B1560 Steam engine, horizontal oscillati...
+ B1566 Engine, steam, horizontal, single ...
+ B1633 Steam engine, metal/paint, George ...
+ B1728 Working model of a single cylinder...
+ B1866 Eight H.P. Oil Engine, S.C. statio...
+ B2259 Engine, internal combustion, singl...
+ 85/304 Steam engine, cross compound hori...
+ 97/122/1 Corliss steam engine, alternato...
+ 97/223/1 Gas engine, horizontal single c...
+ B638 Engine horizontal, model, twin cyli...
+ B639 Model steam engine, horizontal, met...
+ B665 Model, undertype engine, with twin ...
+ B688 Engine, sectional, gas, horizontal ...
+ B795 Model twin cylinder, Tangye, horizo...
+ B796 Working model of horizontal factory...
+ B797 Working model horizontal factory en...
+ B798 Model single cylinder horizontal st...
+ B800 Working model of horizontal factory...
+ B807 Working model of horizontal Marine ...


Industrial Machinery and Equipment > Models

+ 85/2426 Model, Giotto Spacecraft, pewter...
+ B1729 Model, lunar module, Apollo 9 spac...
+ 87/1102 Magnetic denture and lower jaw m...
+ H4142 Sectioned ship model in display ca...
+ 96/183/1 Anatomical model, human head an...
+ 99/4/46 Model steam engine and box, donk...
+ B2257 Canoe, model of life saving gear, ...
+ H5350 Large model of ear (LC)...
+ 91/74 Model (fullsize), industrial desig...
+ 2007/90/1 Architectural model, Khalifa S...
+ B520 Express Locomotive (sectional model...
+ 95/300/2 Half-ship model, 'Lady Manning'...
+ 2006/86/1 Ship model in display case, El...
+ 95/300/1 Half-ship model, 'Lady Hampden'...
+ 92/1741 Models (3), architectural, 'Metr...
+ 2007/79/1 Steam locomotive 3265 model, 8...
+ 2007/80/1 Steam locomotive 3265 model, a...
+ H5327 Half-ship model, TSS 'Maianbar', w...
+ 2007/100/1 Aircraft model, Short Sandrin...
+ 2007/212/1 Aircraft model, Consolidated ...
+ 2007/22/1 Model of a wind turbine, plast...
+ 2007/23/8 Model, stereolithography (SLA)...
+ 2007/43/6 Models (3), wheelbarrows and s...
+ 2007/43/7 Model, coffin and corpse, wood...
+ H5328 Half ship model, SS 'Arakoon', woo...
+ H5329 Ship model, half model of Twin scr...
+ 88/186D Human Anatomical Ear, model, cro...
+ H5349 1 papier-mache skull.(LC)...
+ B525 Model of Douglas Rotary Pump (SB)....
+ B526 Model plough, Double furrow stump j...
+ B536 Ship model, life boat "Blight", hul...
+ B537 Aero engine with propeller, three c...
+ B541 Model blacksmith's tools and stand,...
+ B553 Working model of "Pratten" brickmak...
+ B554 Model, four-furrow disc stump jump ...
+ 2007/99/1 Steam locomotive 3265 model, N...
+ 92/1993 House model, 'The House of Tomor...
+ 92/1994 Architectural model, 'The House ...
+ 92/1995 House model, 'Split Level' house...
+ 93/5/1 Steam locomotive model, AD60 clas...
+ 2008/127/1 Architectural model, card / w...
+ 93/26/1 Model, Automated Wool Harvesting...
+ 93/26/2 Rotary arm model, Automated Wool...
+ 93/107/1 Model ship, trochoidal motion, ...
+ 2008/167/1 Aircraft model, A340-300 Airb...
+ 93/169/1 Model and electric adapter, 190...
+ 2008/29/1 Model, 1:100, of Sydney Observ...
+ 2008/30/1 Model, 1:200, of the Castle Hi...
+ 2008/56/3 Bench, 1:10 scale model, wood,...
+ 2008/98/1 Production model, section of '...



B653 Model, horizontal-steam engine, tangye, blued steel cylinder valve chest lubricator, spoked flywheel solid driving wheel, A A Stewart Collection (OF).

This model is a part of the A. A. Stewart collection of ship, mechanical, and railway models acquired by the Powerhouse Museum over nearly 30 years from 1938 to 1963. Albyn A. Stewart was a trained engineer fascinated by engineering models and he constructed some of those in the collection. Others however were brought from amateur and commercial modellers at great expense to Stewart who travelled regularly to England to seek out models. In January 1938, Percival Marshall, the editor of 'The Model Engineer' England's premiere modelling magazine devoted editorial space to the collection where he stated that "Mr. Stewart has been fortunate in acquiring some excellent examples of both screw and paddle marine engines of considerable value as records of real prototype practice."

In April of the same years he expanded his comments on the collection by saying, "As a trained engineer himself, his judgement of the technical merits of a model is very sound, and I should imagine that his collection is now the finest of its kind in Australia, in private hands. Many of the models are undoubtedly worthy of careful preservation, and I hope that they will eventually find a suitable resting place in one or other of the Australian national museums."

Stewart was first contacted by the Technological Museum, as the Powerhouse Museum was then known, in 1933. The then Director/Curator A. R. Penfold immediately recognised the importance of the engineering models and in 1935 began to loan items for display. Penfold expanded the area available for displaying the models as they were seen as instructive for students at the adjacent Technical College as they were for the general public.

In early 1938 Stewart's company 'Lymdale Ltd.' which owned most of the models was approached about the purchase of a large part of the collection. Stewart was appointed to the Advisory Board of the Museum and in July 1938 it began to purchase the models it had loaned as well as the best examples in the rest of the collection. The cost of this was estimated at over 3000.00 pounds. By 1943 the museum was still acquiring material from the collection and the Advisory Committee made a special appropriation request to the Minister of Education. "In view of the advantage of retaining a collection intact, and the national asset which the museum possesses, the committee recommends the purchase of the remainder of the Stewart collection offered at approximately 2,400. This sum was approved and between 1943 and 1945 around 80 more models were purchased. Apart from the monetary limitations the acquisition was spread over a number of years because some of Stewart's models needed to be finished before they could be sold.

The high costs reflected the quality of the models. Many of the working steam engines are one-off examples hand crafted by amateur modellers over the course of years. The same is true of some of the ship and locomotive models many of which are made to exact scale and include working parts. The models were carefully collected by Stewart who collected as much for posterity as he did for personal interest. Once contacted by the museum he deliberately sought models which would fill historical and technological gaps and as a result the collection is one of the most significant in still extant in Australia. A. A. Stewart died in 1961.

The museum purchased this model in 1941.

Significance Statement, Geoff Barker, March, 2007

References
Marshall, Percival, 'The Model Engineer and Practical Electrician', London, April 29, 1937
Marshall, Percival, 'The Model Engineer and Practical Electrician', London, May, 27, 1937
Marshall, Percival, 'The Model Engineer and Practical Electrician', London, January, 27, 1938
Marshall, Percival, 'The Model Engineer and Practical Electrician', London, April, 14, 1938
Chalmers, A. Mar, 'The Model Engineer in Australia and New Zealand, Melbourne, January, 1939
Davison, G., Webber, K., 'Yesterday's Tomorrows; the Powerhouse Museum and its precursors 1880-2005', Powerhouse Publishing, 2005
Lavery, B. and Stephens, S., 'Ship Models; their purpose and development from 1650 to the present', Zwemmer, London, 1995

 This text content licensed under CC BY-NC.

Description
Model, horizontal-steam engine, tangye, blued steel cylinder valve chest lubricator, spoked flywheel solid driving wheel, A A Stewart Collection (OF).
B653
Height
170 mm
Width
190 mm
Depth
359 mm

 This text content licensed under CC BY-SA.
Acquisition credit line
Purchased 1941


Copyright
Images on this site are reproduced for the purposes of research and study only. Whilst every effort has been made to trace the Copyright holders, we would be grateful for any information concerning Copyright of the images and we will withdraw them immediately on Copyright holder's request.
Object viewed 1620 times. Parent IRN: 410. Master IRN: 410 Img: 8763 Flv: .